Fuel System Kit
Fuel System Kit
$1,925.00
Confused about the fuel system and all the options? This kit includes everything you need to connect your fuel tank to your engine including pumps, adapters, AN fittings, clamps, fuel lines, etc. It’s good for applications up to 650HP. This is the same configuration that was used on our National Championship SL-C and it has also been used on dozens of other builds. Builder to supply fasteners to mount the above to the included aluminum plate.
Contents of kit shown below.
Car:
Quantity:
| Qty. | Part | Description |
|---|---|---|
| 1 | 15108 | 6 O-Ring to 6 Adapter |
| 13 | fbm4412 | Hose End -6 Straight |
| 1 | fbm4414 | Hose End -10 Straight |
| 4 | fbm4432 | Hose End -6 90 Degrees |
| 1 | fbm4434 | Hose End -10 90 Degrees |
| 1 | fcu0620 | Hose -6 20' |
| 1 | fcu1003 | Hose -10 6' |
| 1 | at9892086 | Adapter -8 to -6 |
| 1 | 4706bk | Fuel Filter 100 Micron |
| 1 | 23000 | Fuel Filter 40 Micron |
| 3 | fbm2246 | Adapter m12 to -6 Fuel Pump |
| 1 | 461018 | Adapter m18 to -10 Fuel Pump |
| 1 | FRA999218 | 18mm Crush Washer |
| 1 | 13109 | Fuel Pressure Regulator FI |
| 1 | 580464200 | Fuel Pump EFI |
| 1 | GSL392BX | Fuel Pump EFI |
| 1 | 999212 | 12mm Crush Washer |
| 2 | 670470 | M10x1 to 6 AN Adapter |
| 2 | 3225t82 | Rubber Cushioned Clamp Fuel Pump Mount |
| 2 | 3225t15 | Rubber Cushioned Clamp Fuel Pump Mount |
| 1 | 650340 | Fuel Pressure Guage 0-100 PSI |
| 1 | Aluminum mounting panel |